Todos los productos
-
Indicador de presión diferenciada
-
indicador de presión digital
-
Indicador de presión de acero inoxidable
-
Transmisor de presión de la precisión
-
Regulador programable de la lógica
-
Interruptor llano del flotador
-
Posicionador de la válvula neumática
-
Sensor del transmisor de la temperatura
-
Hart Field Communicator
-
Válvula electromagnética
-
Válvulas de control
-
Metro de flujo de la alta exactitud
-
bomba de agua sumergible
-
Múltiple del transmisor de presión
-
Metro llano ultrasónico
-
Metro de poder actual del voltaje
Fluke 279FC True RMS Thermal Multimeter In Stock
Datos del producto
| Precisión básica de CC | 0,09% | Ancho de banda | 1% 45 Hz a 65 Hz, filtro de paso bajo de tiempo completo |
|---|---|---|---|
| Voltaje | 1000 V CA/CC | Resistencia | 50 MΩ |
| Frecuencia | 100 kHz | Temperatura de funcionamiento | -10 °C a 50 °C |
| Temperatura de almacenamiento | -20 ºC a 60 ºC | Elevación | 2000M |
Descripción de producto
Fluke 279FC True RMS Thermal Multimeter
Key features:
- Full-featured multimeter with built-in thermal imager
- There are 15 measurement functions, including: AC voltage (with low-pass filter), DC voltage, resistance, continuity, capacitance, diode detection, min/max/average, AC current (via iFlex flexible current probe), frequency
- With thermal imaging, multiple electrical problems can be detected quickly and safely without time-consuming testing and validation
- 2-in-1 tools can increase productivity – you don't need to go back to the repair shop or office to access a shared thermal camera or wait for a thermal imager – to solve problems in a limited amount of time!
- The iFlex flexible current probe expands your measurement capabilities – it can measure current in deep, narrow, hard-to-reach spaces (up to 2500 A AC current)
- Wireless communication with smartphones up to 20 ft./6.1 m (when there are no obstacles) saves measurements and images
- Image resolution – 80 x 60
- 3.5"/8.89 cm color LCD screen
- Rechargeable lithium battery for a full day (more than 10 hours) under normal operating conditions
- Assembled in the USA
- Three-year standard warranty
- Automatic shutdown to save power
- CAT III 1000 V, CAT IV 600 V measurement categories
- Optional: Fluke i2500-10 or i2500- 18 iFlex® Flexible Current Probe, Fluke BC500TDMM AC Charger, and Fluke BP500 Lithium Battery 3000 mAh
- Durable and withstands drops of up to 3 m (9.8 ft), double insulation and a patterned rubber sheath for added protection
Productos recomendados


